- Magnetic needle mounted on base
- Pivot point for free swinging
- Identifies pole positions
- Clear and identifiable results
 | | Usually delivered within 10 working days |
|
- Ability to magnetise iron bars
- Demagnetises normal magnets
- Use in inductance experiments
- Straightforward to operate
| | Usually delivered within 10 working days |
|
- Two different voltages available: 230 or 115V
- Impact resistant plastic so safe to touch
- Can be used as either a primary or secondary coil
- Suitable for a range of experiments
| | Usually delivered within 10 working days |
|
- Ideal for demonstrating the Thomson's ring experiment
- Use alongside the transformer core d and mains coil
- Visible and clear results from the repelling forces
- Straightforward and easy to use
| | Usually delivered within 10 working days |
|
- Switch mounted on a transparent acrylic base
- For the momentary closing of the circuit
- Interrupts the flow of electrons in a circuit when held down
- With sockets for 4mm safety plugs
| | Usually delivered within 10 working days |
|
- Ideal apparatus for demonstrating Oersted's experiment
- Magnetic needle secured to a stable base
- Electric current passes through a copper wire
- Obvious and clear results of the magnetic field
| | Usually delivered within 10 working days |
|
- Classic set up to prove Ohm's law
- Suitable for a two-pole resistor
- Designed for use with safety equipment leads
- Circuit symbols printed on the outside for recognition
| | Usually delivered within 10 working days |
|
- Additional or replacement unit for the Complete Fine Beam Tube System
- Connects with the Helmholtz Coils and Tube
- Three-digit digital display for easy monitoring
- Straightforward and easy to connect
| | Usually delivered within 10 working days |
|
- Pack of 10 E10 lamp bulbs
- Comes in a Type A style, as pictured
- Can be used with E10 lamp sockets
- Nine different pack options, with varying specifications
| | Usually delivered within 10 working days |
From: £24.22 (exc. 20% VAT) |
- Pack of 10 E10 lamp bulbs
- Comes in a Type B style, as pictured
- Can be used with E10 lamp sockets
- All bulbs are 1.3V, 60mA
| | Usually delivered within 10 working days |
|
- 10 screw-in sockets for lamps with an E10 screw thread
- Electrical contact is made via uninsulated wires passing though eyelets
- Contact also be made via crocodile clips
- Base: 28mm diameter
| | Usually delivered within 10 working days |
|
- Five metal strips
- Used to demonstrate spot-welding
- Compatible with a five turn coil
- Straightforward and easy to use
| | Usually delivered within 10 working days |
|
